Detailed installation process of glass partition

[China Glass Net] The advantages of glass partitioning compared to other partitions are obvious, but how to make full use of the advantages of glass partitioning requires construction workers to pay attention to the correct process during the installation process. Here, we share the glass partition construction process. What are the steps?

The first is the installation of the keel.

a, Tiandi bone installation: according to the design requirements to fix the world keel, if there is no design requirements, you can use φ8-φ12 expansion bolts or 3-5 inch nails to fix, the expansion point of the expansion bolts is 600-800 mm.

b. Installation along the keel along the wall: Fix the side keel according to the design requirements. The keel should start the ash grooving groove. If there is no design requirement, it can be fixed with φ8—φ12 expansion bolt or 3-5 inch nail. The fixed point spacing is 800— 1000 mm. Preservative treatment before installation.

c, the main keel is installed, according to the design requirements, the main keel is fixed according to the position of the split line, and fixed with 4 inch nails. The fixed end of the dragon avoiding bone should be no less than three nails. Must be installed firmly.

d, according to the design requirements, according to the position of the small keel, fixed with a button or nail. Must be installed firmly. Before installing the small keel, it is also possible to install a glass tank on the small keel according to the specifications of the mounting glass.

Followed by the installation of the glass according to the keel, according to the design requirements, according to the specifications of the glass installed on the small keel; if the bead is installed, first use the bead on the side of the fixed glass, and use the rubber pad to under the glass, and then fix the glass with the bead If the glass is directly fixed with glass glue, the glass should be installed in the reserved groove of the small keel and then closed with glass glue.

In addition, it is necessary to hit the glass glue, and stick the paper tape around the glass. According to the design requirements, all kinds of glass glue are evenly hit between the glass and the small keel. After the glass glue is completely dry, tear off the paper tape. Later, the bead is installed, and the bead of various specifications and materials is fixed according to the design requirements, and the bead is fixed on the small keel by straight nail or glass glue.

    Waist Interlining is a kind of woven  interlining ,specially used in waist of the trousers and skirt . It can make the waist fabric hard ,skid resistance,and setting the pattern .

    It can be cutted to strip ,maybe 20mm ,or 30mm or 50mm to fit the clothes size . 

Waist Interlining

Waist Interlining,Black Waist Interlining,Non Fusible Waist Interlining,TC Waist Interlining

Baoding Garment Interlining Factory , https://www.bcinterlining.com