The stability of the glass bottle liquid drop determines the bottle forming rate
[China Glass Net] In the production of glass bottles, the raw materials for making glass bottles are heated and melted by kiln, and then supplied to the following system by different weights and different material types through automatic trimming feeders. The bottle machine is used to complete the production of glass bottles, and the stability of the glass liquid droplets is critical, which can bring about a significant effect on production.
The original glass bottle factory kiln is mostly a semi-gas furnace, the temperature of the glass liquid of the feeder tank varies greatly, and the cut glass lumps are also of different sizes, sometimes only oil guns (steam jets) and The observation hole is slowly adjusted, and it is difficult to use after being guided to the bottle making machine. Therefore, the supply and demand information of the glass bottle is high, which affects the development of the glass bottle factory for a period of time.
In recent years, the kiln of the glass bottle factory has been changed to full gas, and the feed port of the feeder has been replaced by electric heating (the high temperature electric silicon carbon rod is installed in a certain proportion in the bowl to automatically adjust the temperature) The temperature change in the bowl can be controlled within 5-10 degrees above and below. The feed drops supplied to the bottle making machine are uniform and the elasticity is also very good, completely solving the stability of the glass liquid, so that the bottle making machine At the time of production, the feed liquid is used very well, and the bottle forming rate of the production is greatly improved.
Mens Casual Shirts,Casual Men'S Shirts,Casual Plain Men'S New Dress Shirts,Men Casual Black Shirt
Shaoxing Moonten Trade Co., Ltd , https://www.sxmoonten.com